Cylinder head 1275 cc A-plus series MPi 1997 on
Alloy Rocker covers
Required: 1
from conversions, looks like new
Required: 1
genuine type with 14,28 mm diameter
alternatives
Required: 1
reproduction with 14,28 mm diameter
alternatives
Required: 1
with 33.2 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
with 35.7 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
with 29.4 mm head diameter and 90.7 mm total length - identified by triple collet groove
Required: 4
top
for valves with triple collet groove
Required: 8
oil gallery. Diameter: 1/2", total height: 3/8"
Required: 1
for water hole
Required: 3
thermostat housing - uprated, made from high quality 1.5 mm gasket material, extremepressure resistant to 750 psi
alternative
Required: 2
CNC made alloy billet reproduction. The original tooling is no longer available
Required: 1
large port specification
if LCB-Manifold fitted or bigger ports
Required: 1
classic copper gasket on metal layer for engines up to 1340 cc
alternatives
Required: 1
classic soft material gasket on metal layer
Required: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed
alternatives
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
with Payen classic soft material head gasket on metal layer with special sealing ring for the oil feed
Required: 1
