Internal electrics - horn, relays and switches
2 fuse variant with 5 screw-in terminals. SF6 type without cover
Required: 1
35 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
Required: 1
50 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
Required: 1
for C39 and C40 dynamo. RB106 type with 5 screw-in terminals
Required: 1
control box cover - sandblasted and painted silver
Required: 1
control box
Required: 1
replica of the FL5 flasher relay with 3 screw-in terminals and round housing
Alternatives
Required: 1
replica of the FL5 flasher relay with 3 Lucar terminals and round housing
Alternatives
Required: 1
FL5 flasher relay with 3 terminals and round housing
Required: 1
low note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
Required: 1
high note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
Required: 1
for original horn - new item
Alternatives
Required: 2
for LH horn
Required: 1
for RH horn
Required: 1
stop light and rear indicator. Reproduction of the Lucas type DB10 with modern electronics and 8 screw terminals
1500
Required: 1
headlamps - round FS22/1 type with screw-in terminals
Required: 1
foot dipper switch - LHD only
1600, 1622, Twin Cam and De Luxe
Required: 1
foot dipper switch - RHD only
1600, 1622, Twin Cam and De Luxe
Required: 1
SB40 type with 4 screw terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
Optional extra
Required: 1
