SU-HS4 internal carburettor
fixed type - marked: AN - standard mixture
848 cc automatic
carburettor type: AUD170, AUD250, AUD186, AUD360, AUD394
Required: 1
fixed type - marked: EB
848 cc automatic
carburettor type: AUD170, AUD250, AUD186, AUD360, AUD394
Required: 1
fixed type - marked: H6 - rich mixture
848 cc automatic
carburettor type: AUD170, AUD250, AUD186, AUD360, AUD394
Required: 1
fixed type - marked: AC - standard mixturev
998 cc automatic
carburettor type: AUD184, AUD366, AUD367, AUD393
Required: 1
fixed type - marked: HA - weak mixture
998 cc automatic upto 1974
carburettor type: AUD184, AUD366, AUD367, AUD393
Required: 1
fixed type - marked: M1 - rich mixture
998 cc automatic upto 1974
carburettor type: AUD184, AUD366, AUD367, AUD393
Required: 1
fixed type - marked: DZ - standard mixture
1275 GT upto 1971
carburettor type: AUD317
Required: 1
fixed type - marked: BQ - rich mixture
1275 GT upto 1971
carburettor type: AUD317
Required: 1
spring loaded type - marked: ABS
848 cc 1974
carburettor type: AUD611, AUD713
Required: 1
spring loaded type - marked: ADH
848 cc with "Waxstat" type jet
carburettor type: FZX1064
Required: 1
spring loaded type - marked: AAG
998 cc 1972 upto 1973
carburettor type: AUD450, AUD548
Required: 1
spring loaded type - marked: ABX
998 cc 1974
carburettor type: AUD679, AUD706
Required: 1
spring loaded type - marked: ADE
998 cc 1975 upto introduction "Waxstat" type jet
carburettor type: FZX1044, FZX1065, FZX1146
Required: 1
spring loaded type - marked: ADF
998 cc Australia, 1976 upto introduction "Waxstat" type jet
carburettor type: FZX1094, FZX1115, FZX1146
Required: 1
spring loaded type for SU-HS2 carburettors - marked: AAC
998 cc with "Waxstat" type jet
carburettor type: AUD679, FZX1415, FZX1416
Required: 1
spring loaded type - marked: ABP
1098 cc
carburettor type: AUD608,FZX1045, FZX1066, FZX1160, FZX1162
Required: 1
spring loaded type - marked: AAR
1275 GT 1971 bis 1972
carburettor type: AUD453
Required: 1
spring loaded type - marked: ABB
1275 GT 1972 on
carburettor type: AUD567, FZX1046, FZX1047, FZX1164
Required: 1
for SU-HS4 carburettors - supplied with float
Required: 1
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Required: 1
for SU carburettors - bore: 0.070"
alternative grose jet 19687 could be used
Required: 1
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
alternative for needle valve 16334
Required: 1
0.090"
up to introduction "Waxstat" type jet
identification sleeve: black
Required: 1
assembly. For SU-HS carburettors with fixed metering needle
carburettors with fixed needle
Required: 1
assembly. SU-HS carburettors with spring loaded needle, variant with fine threat
carburettors with spring loaded needle
Required: 1
coarse thread
carburettors with fixed needle
Required: 1
fine thread
carburettors with spring loaded needle
Required: 1
main jet - coarse thread
for mixture adusting
Required: 1
main jet - fine thread
for mixture adusting
Required: 1
and link
998 cc 1974
carburettor type: AUD679
Required: 1
and link
up to introduction "Waxstat" type jet
alle carburettor types except: AUD654, AUD679, FZX1016, FZX1094
Required: 1
and link
up to introduction "Waxstat" type jet
Replacement for genuine link assembly
Required: 1
link choke lever to jet - "Waxstat" type jet
Required: 1
choke lever - pair
up to introduction "Waxstat" type jet
Required: 1
choke lever - pair
carbs with 'Waxstat' type jet
Required: 1
0.010" oversize
body bosses should be reamed to oversize
Required: 1
with screws and gaskets
throttle disc with hole and overrun valve
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes. Ream body boses to 9.5 mms
Required: 2
for SU-HS4 type carburettor. Identify by throttle disc without valve. Comprising service kit 214275 plus throttle disc and throttle spindle
standard jet
Required: 1
for one carburettor, throttle disc with valve
standard jet
Required: 1
for one SU-HS4 carburettor - feature: with 'Waxstat' type main jet ans throttle disc without valve
Required: 1
for one SU-HS4 carburettor - feature: with 'Waxstat' type main jet ans throttle disc with valve
Required: 1
