Switches - MK3 1970 upto 1976
for 2 rocker switches, cut-outs vertical
1971 up to 1975, not Van & Pick-Up
Required: 1
for 2 rocker switches, cut-outs vertical and one centre hole for washer pump
1974 up to 1975, not Van & Pick-Up
Required: 1
wiper - 38 mm x 23 mm, with black bezel
single speed
Required: 1
wiper - 38 mm x 23 mm, with black bezel
if 2 speed wipermotor is fitted
Required: 1
lights, including chrome bezel - characteristic: non illuminated
Germany and Sweden, early cars
Required: 1
wiper - 43 mm x 28 mm, chrome bezel
Germany and Sweden, early cars
single speed
Required: 1
wiper - 43 mm x 28 mm, chrome bezel
Germany and Sweden, early cars
if 2 speed wipermotor is fitted
Required: 1
with barrel and two keys
if no steering lock fitted
Required: 1
with two keys - for ignition switch
if no steering lock fitted
for switch 8415
Required: 1
key enters from side
if fitted
Required: 1
blank, ignition
double sided, length tip to shoulder 1.3/32"
Required: 1
steering lock - ignition and starter
if fitted
Required: 1
indicator switch with dip switch and horn push
wiring plug, serial number: 39384
Required: 1
hazard warning - non illuminated switch with black bezel and six spade terminals. For LHD models
Germany, France, Canada, Norway
if fitted
Required: 1
for rocker switch hazard
Germany, France, Canada, Norway
if fitted
Required: 1
ignition, in red with chrome bezel and 1/2" diameter
Germany, France, Canada, Norway
if fitted
Required: 1
for hazard switch
Germany, France, Canada, Norway
if fitted
Required: 1
retaining bracket hazard switch to A-panel
Germany, France, Canada, Norway
if fitted
Required: 2
interior light - metal base
screw fitting to A-Panel, alternative switch 243377 could be used
Required: 2
retaining switch interior light to A-panel
Required: 2
