Inner gears, 4 synchromesh, from September 1968 up to 1979
with 17 teeth - for vehicles with 4-synchro gearbox and 14 mm mainshaft nose
not for Clubman 1275GT and Cooper S (1968-79)
Required: 1
with 18 teeth - avec denture de 18 - for vehicles with 4-synchro gearbox and 14 mm mainshaft nose
Clubman 1275GT and Cooper S (1968-79)
Required: 1
for mainshaft end in 1st motion shaft, open cage
Required: 1
identified by 0.550" (14 mm) diameter on small end nose
Required: 1
high quality steel reproduction of the original design
Required: 4
2 row, metall cage
could be replaced by needle bearing 306133
Required: 1
1 row, nylon cage
replaces needle bearing 201649 with metal cage
Required: 1
for gear, 1 row, nylon cage
replaces earlier bearings with metal cage
Required: 1
for needle bearing gear
Required: 1
Double ball, Gearbox mainshaft
outer diameter: 65 mm
Required: 1
as stop in gearbox casing
for gearbox main bearing 215940
Required: 1
for gearbox main bearing, cast iron, 4 hole fitting
for remote type gearbox
Required: 1
for gearbox main bearing, 4 hole fitting
for rodchange type gearbox
Required: 1
teeth: 29/25/20/15. Feature: the 29 teeth were 3.1/8" diameter - for vehicles with 4-synchro gearbox and 14 mm mainshaft nose
not for Clubman 1275GT and Cooper S (1968-79)
Required: 1
teeth: 29/25/20/15. Feature: the 29 teeth were 3" diameter - for vehicles with 4-synchro gearbox and 14 mm mainshaft nose
Clubman 1275GT and Cooper S (1968-79)
Required: 1
laygear, small - 0.125" to 0.126"
as requiered
laygear, small - 0.127" to 0.128"
as requiered
reverse 17/18 teeth
for rodchange type gearbox
Required: 1
Primary drive, 31 teeth, shaft size: 0.750" (19 mm)
equal shaft length
Required: 1
Idler gear, 0.130"- 0.131"
green coding, as requiered
Required: 2
Idler gear, 0.132"- 0.133"
black coding, as required
Required: 2
Idler gear, 0.134"- 0.135"
white coding, as requiered
Required: 2
Idler gear, 0.136"- 0.137"
blue coding, as requiered
Required: 2
Idler gear, 0.138"- 0.139"
red coding, as requiered
Required: 2
for idler gear
outer diameter: 1.065" (27.05 mm)
Required: 2
1.1/8", 1/2" drive, for nut main shaft 1st motion
more workshop tools
Required: 1
with 1.1/2" AF (38 mm) spanner size. 1/2" square drive socket with 37 mm internal depth and 80 mm total height. For Austin Healey ball joints and many other applications
more workshop tools
Required: 1
