Windscreen wiper, rack and wheel box
stainless steel - LHD only
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 2
stainless steel - RHD only
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 2
stainless steel
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 2
water pump
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 1
wiper rack
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 1
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 2
wiper rack
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 1
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 1
wheel box - chromed
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 2
wheel box
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 2
wheel box
TR2, TR3 to TS12567.
Main identifier: wiper arms with collet fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blades
Required: 2
stainless steel - LHD only
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
stainless steel - RHD only
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
stainless steel
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
wiper rack extension
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 1
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
wiper rack
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 1
with nut - wiper rack
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 1
wiper rack casing to wiper motor
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 1
length: 60"
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 1
wheel box for Lucas DR3A type wiper motor. Content: chromed six sided nut, chrome bezel and sealing rubber
TR3 from TS12568, TR3A and TR3B - main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
wheel box - chromed six sided nut for Lucas DR3A type wiper motor
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
- separately
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
- separately
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
wheel box
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 2
TR3 from TS12568, TR3A and TR3B.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'spoon' fitting for wiper blade
Required: 1
stainless steel, straight for driver side - LHD only
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, straight for driver side - RHD only
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, RH cranked for passenger side - LHD only
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, LH cranked for passenger side - RHD only
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
stainless steel, length: 10" - for flat and curved screens. Feature: centre hinge for wiper arm with 5.2 mm bayonet fitting
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 2
wiper rack extension
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 2
wiper rack
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
with nut - wiper rack
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
wiper rack casing to wiper motor
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
length: 60"
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
for wheel box with jet assembly. Complete car set
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
with bush, RH windscreen washer
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
with bush, LH windscreen washer
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
wheel box - chromed six sided nut for Lucas DR3A type wiper motor
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 2
TR4 and TR4A.
Main identifier: wiper arms with spline fitment to wheel box and 5.2 mm 'bayonet' fitting for wiper blade
Required: 1
