Gearbox, 4 synchro outer - TR3B to TR4A
exchange. Non Overdrive specification. Identify by 11 mm gearbox mounting flange
TR3B and early TR4
Required: 1
exchange. Overdrive specification. Identify by 11 mm gearbox mounting flange
TR3B and early TR4.
Required: 1
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 1
non Overdrive specification. Feature: 14 mm gearbox mounting flange
late TR4, TR4A.
Required: 1
exchange. Overdrive specification. Identify by 14 mm gearbox mounting flange
late TR4, TR4A
Required: 1
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 1
starter motor to gearbox
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 3
starter motor to gearbox
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 2
starter motor to gearbox
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 2
starter motor to gearbox
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 2
gearbox to cylinder block
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 6
3/4" x 5/16" UNF
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 2
gearbox to clutch slave cylinder
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 2
TR3B and early TR4.
Identify by 11 mm gearbox mounting flange
Required: 13
starter motor to gearbox
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 3
starter motor to gearbox
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 2
starter motor to gearbox
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 2
starter motor to gearbox
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 2
gearbox to cylinder block
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 6
3/4" x 5/16" UNF
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 2
1.1/2" x 5/16" UNF
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 2
late TR4, TR4A.
Identify by 14 mm gearbox mounting flange
Required: 13
clutch housing - stainless steel reproduction
Required: 1
clutch shaft - RH side - length: 7/8"
TR3B and early TR4
Required: 1
clutch shaft - LH side - length: 7/8"
TR3B and early TR4
Required: 1
clutch shaft - RH and LH side - length: 3/8"
Late TR4, TR4A
Required: 2
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Required: 1
oil drain and oil filler - magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Alternatives
Required: 1
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
Alternatives
Required: 1
rear extension
Non overdrive models only
Required: 1
remote control housing to gearbox
Non overdrive models only
Required: 1
gearbox to mounting - RH side
Non overdrive models only
Required: 1
gearbox to mounting - LH side
Non overdrive models only
Required: 1
to fix gearbox remote control housing to mounting bracket
Non overdrive models only
Required: 1
speedo drive - identified by 15 teeth
Non overdrive models only
Required: 1
speedometer cable to speedometer pinion on gearbox - new item
Non overdrive models only
Required: 1
speedometer cable to speedometer pinion on gearbox - used item
Non overdrive models only
Required: 1
speedo drive retaining
Non overdrive models only
Required: 1
TR4 and TR4A
Required: 1
Required: 1
gear lever - new item
Required: 1
gear lever - used item
Required: 1
TR4
Required: 1
TR4A
Required: 1
- new item
Required: 1
side
Required: 1
1st and 2nd speed
Required: 1
1st and 2nd speed - new item
Required: 1
3rd and 4th speed - new item
Required: 1
shaft reverse selector fork
Required: 1
reverse speed
Required: 1
reverse speed - new item
Required: 1
Detent selector shaft on 1st to 4th speed
Required: 2
Detent reverse selector shaft
Required: 1
