Fuel injection: Metering unit and injection details
with connectors, stainless steel braided. Supplied in sets of 6
Supplied in sets of 6
Required: 1
with correct plastic tubing and zinc plated end fittings, as original
Supplied in sets of 6
Required: 1
with bevelled head, a push-on nylon bush and a wire 'C' clip fitted to the nozzle end of the injector - reconditioned, in exchange
Please note: if the nozzle end is held into the body by crimping, the injector is non-serviceable
Required: 6
with hexagon head, a screw-on nylon bush and a wire 'C' clip fitted to the nozzle end of the injector - reconditioned, in exchange
Required: 6
injector to inlet manifold, stainless steel
Alternatives
Required: 3
injector pipe to injector
Part of our injector lead set 18907 (ill. 1)
Required: 6
for injector pipes, double type
TR6 from CR1
Required: 2
for injector pipes, quadruple type
TR6 from CR1
Required: 3
injector pipe no.1 and no.6 to metering unit
Part of our injector lead set 18907 (ill. 1)
Required: 2
injector pipe no.3 and no.4 to metering unit
Part of our injector lead set 18907 (ill. 1)
Required: 2
for metering unit vacuum
Partial and full load calibration
Required: 1
injector pipe no.2 and no.5 to metering unit
Part of our injector lead set 18907 (ill. 1)
Required: 2
for outlet no.1, no.3, no.4 and no.6
Required: 4
for inlet
Required: 1
for inlet non-return valve
Required: 1
for air inlet balance tube
Required: 1
metering unit. Supplied in sets of 5
Contains ill. no.34 and no.36
Required: 1
exchange, reference no: LU54073014, resp. LU54073051. Identify by push-on petrol return tube connector
TR5
Required: 1
exchange, reference no: LU5473029 resp. LU54073047. Identify by push-on petrol return tube connector
TR6 to CP52533
Required: 1
exchange, reference no: LU5473050. Identify by push-on petrol return tube connector
TR6 from CP52534 to CP53160
Required: 1
with Lucas reference no: LU5473053. Identify by push-on petrol return tube connector. Reconditioned, in exchange
TR6 from CP53161 to CP75314 (from February 1971 to November 1971)
Required: 1
exchange, reference no: LU5473069. Identify by screw-on petrol return tube connector
TR6 from CP75315 to CP77718
Required: 1
reference no: LU5473065. Identified by screw-on petrol return tube connector - reconditioned, in exchange
TR6 from CR1
Required: 1
Valvemaster - lead substitute. Dosage 1:1000, enough for 250 litres fuel
Required: 1
Content: 250 ml (€90.64 / 1000 ml)
Classic Valvemaster Plus - lead substitute with octane booster. Dosage 1:1000, enough for 250 litres fuel
Lead substitute
Required: 1
Content: 250 ml (€92.00 / 1000 ml)
