We are here for you: 6 a.m. to 10 p.m. - Telephone +49 26 83 - 97 99 0

all supply chains intact • Stock levels at historic highs • Express shipping until 10:00 pm

We focus totally on fast and complete shipping

Lucas High performance ignition coil

39 EUR
High performance ignition coil
with push-in HT lead terminal and approx. 2.8 Ohm primary resistance. Non ballasted type

Sprite / Midget 948, 1098 and 1275 (1958-74)

Land Rover Series II, IIA and III 4 cylinder Petrol (1958-85)

Triumph Herald (1959-71) • TR2, TR3, TR3A, TR3B, TR4 and TR4A (1952-67) • TR5/250 and TR6 (1968-76) • Spitfire MKI to MKIV 1300 (1962-70) • TR7 and TR8 (1975-81) • Vitesse (1962-71) • Stag (1970-77)

Jaguar All Jaguar 6 cylinder and V8 to 1969

Austin Healey BN1 to BJ8 (1953-68)

MG TA, TB, TC, TD and TF (1936-55) • MGA (1955-62) • MGB and MGB V8 chrome bumper (to September 1974) • MGC (1967-69)

Morris Minor with 803 cc, 948 cc and 1098 cc engines (1952-71)

Aston Martin DB2 (1950-53) • DB2/4 (1953-57) • DB Mk III (1957-59) • DB4 (1958-63)

Ignition coils have a “+” (POS) and a “-” (NEG) next to each of it’s two low voltage terminals. That’s because coils need to have the same polarity as your system: wiring backwards will weaken the spark. The wire that goes between the distributor points and the low voltage terminal on your coil, the low tension lead, should be connected to the terminal that is labelled for the same polarity as your battery ground. For instance in an early positive earth British Classic Car, the low tension lead should attach at the terminal marked “+” (POS). If that same vehicle were converted to negative earth the coil should be turned 180 degrees in the holder and the wire connected to the “-” (NEG) terminal.