Tap and Die set metric

110-piece set of metric taps from M2 to M18 (internal and external thread) made of tungsten steel in sturdy sheet steel case.

You should not find a metric thread on your vehicle that you cannot cut or save with this set.
From M2 to M18 in standard pitch, plus several fine threads, each with internal and external thread, made of tungsten steel, all clearly labelled and tidy in a sheet steel case.

Metric taps in 35 sizes/pitch, each with rough and finish taps:
M2 x 0.4
M3 x 0.5
M4 x 0.7
M5 x 0.8
M6 x 0.75 - M6 x 1.0
M7 x 0.75 - M7 x 1.0
M8 x 0.75 - M8 x 1.0 - M8 x 1.25
M9 x 0.75 - M9 x 1.0 - M9 x 1.25
M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x 1.5
M11 x 0.75 - M11 x 1.0 - M11 x 1.25 - M11 x 1.5
M12 x 0.75 - M12 x 1.0 - M12 x 1.25 - M12 x 1.5 - M12 x 1.75
M14 x 1.0 - M14 x 1.25 - M14 x 1.5 - M14 x 2
M16 x 1.0 - M16 x 1.5 - M16 x 2.0
M18 x 1.5

Metric dies in 35 sizes/pitch:
M2 x 0.4
M3 x 0.5
M4 x 0.7
M5 x 0.8
M6 x 0.75 - M6 x 1.0
M7 x 0.75 - M7 x 1.0
M8 x 0.75 - M8 x 1.0 - M8 x 1.25
M9 x 0.75 - M9 x 1.0 - M9 x 1.25
M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x 1.5
M11 x 0.75 - M11 x 1.0 - M11 x 1.25 - M11 x 1.5
M12 x 0.75 - M12 x 1.0 - M12 x 1.25 - M12 x 1.5 - M12 x 1.75
M14 x 1.0 - M14 x 1.25 - M14 x 1.5 - M14 x 2
M16 x 1.0 - M16 x 1.5 - M16 x 2.0
M18 x 1.5

2 tap wrenches: M3-M12 and M6-M20
2 die holders: 25 and 38 mm outer diameter
1 T-handle for taps: M3 to M6