Cylinder head

Product number: 507620
exchange - for 1250 cc XPAG engine. Charcteristic: elongated water holes in head, inlet valves with 1.7/16" diameter and exhaust valves with 1.3/8" diameter

€1,480.82

incl. Tax, excl. Shipping
Product number: 437124
€862.29
Required: 1
Product Information "Cylinder head"

MG: TD from engine no. 9408 to 22734 (August 1951 to November 1952)

exchange - for 1250 cc XPAG engine. Charcteristic: elongated water holes in head, inlet valves with 1.7/16" diameter and exhaust valves with 1.3/8" diameter

Every cylinder head is inspected for cracks. Valve guides are measured for wear and either resized or renewed to conform to original tolerances. Valve seats are machined so as to retain the correct seat angles, widths, valve heights and valve seating concentric with the centre line of the valve guide bore. Valves are replaced. All valve springs are tested for squareness, free height and compressed load length. Cylinder heads are checked for distortion and thickness. When machining the cylinder head face, particular attention is paid to maintaining the correct surface finish specified by the gasket manufacturer. On all our engines we grant with professional installation 24-month guarantee in accordance with our general terms of trade.

You have decided to purchase a reconditioned item from us.
Please note: This item is only available on a COU (Customer’s Own Unit) basis. Therefore, we will require your own unit to be sent to us free of charge for reconditioning.