Transfer box LT230 - outer
front housing to center
To VIN LA 939975 (about 1994)
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
mounting front housing to center
To VIN LA 939975 (about 1994)
Required: 7
mounting front housing to center
From VIN MA 939976 (about 1994)
Required: 7
side cover
To VIN LA 939975 (about 1994)
Required: 1
non-setting gasket and jointing compound
From VIN LA 939975 (about 1994)
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
mounting side cover, front
To VIN LA 939975 (about 1994)
Required: 7
mounting side cover, front
From VIN MA 939976 (about 1994)
Required: 7
cross shaft. On top of transfer box
To transfer box number 43D
Required: 1
cross shaft. On top of transfer box
From transfer box number 34D and letter G following
Required: 1
cover cross shaft
To VIN LA 939975 (about 1994)
Required: 1
non-setting gasket and jointing compound
From VIN MA 939976 (about 1994)
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
on top of transfer box, cover cross shaft
For the LT85 gearbox
Required: 1
on top of transfer box, cover cross shaft
For the LT77 gearbox. Except 90
Required: 1
on top of transfer box, cover cross shaft
For the LT77 gearbox, 90
Required: 1
on top of transfer box, cover cross shaft
Alle 90er nach Vin MA939976 (etwa 1995)
Required: 1
laterally, cover cross shaft
To transfer box suffix 43D
Required: 1
to banjo, breather pipe
Required: 2
gear change cross shaft - LT230 transfer box
Required: 1
for fixing the centre housing on LT230 transfer boxes
Required: 1
centre section - LT230 transfer box
Required: 1
speedometer
From ID 22D 309417E
Required: 1
mounting cover power take off
Required: 1
mounting housing speedometer
Required: 1
main casing
except automatic shift interlock
Required: 1
main casing
With automatic shift interlock
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
main casing
13D transfer box
Required: 1
main casing, lower position
Required: 1
mounting cover, lower position main casing
Required: 10
mounting cover, lower position main casing
Required: 10
mounting cover, lower position main casing
transfer box 22D 28D 32D
Required: 10
mounting cover lower position, main casing
transfer box 43D
Required: 10
mounting main casing
Required: 2
oil guide
Required: 1
Hylosil® 101 ivory RTV Silicone
Required: 1
Content: 85 g (€140.12 / 1000 g)
main casing, front position
Required: 1
rear shaft
To transfer box suffix 551442F
Required: 1
rear shaft
From transfer box suffix 551443G
Required: 1
exhaust system - attached to the LT230 transfer box
Required: 1
exhaust system - attached to the LT230 transfer box
Required: 1
rear
To VIN La 939975 (about 1994)
Required: 1
rear
From VIN MA 939976 (about 1994)
Required: 1
mounting main casing
13D transfer box
Required: 6
LT230 - reconditioned, in exchange
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
