Pedal del acelerador con varillaje y cable de choke - TR5, TR6 PI hasta Septiembre 1972
Necesarios: 1
and screw - choke cable to metering unit
Necesarios: 1
cable operated fast idle
Necesarios: 1
and screw - choke cable to fast idle cam
Necesarios: 1
choke cable
TR6 from engine no. CP50001
Necesarios: 1
for fast idle adjusting screw
Necesarios: 1
with 7/16" inner diameter
Fast idle cam to bracket
Necesarios: 1
Fast idle cam to bracket
Necesarios: 1
with 5/16" inner diameter
Fast idle cam to bracket
Necesarios: 1
return spring to inner wing
Necesarios: 1
accelerator cable through hole in dash shelf
Necesarios: 1
accelerator cable an RH inner wing
Necesarios: 1
TR5, TR6 to engine no. CP26998
Necesarios: 1
TR6 from engine no. CP50001
Necesarios: 1
Accelerator cable to throttle lever
Necesarios: 1
Accelerator cable to throttle lever
Necesarios: 1
for throttle stop adjusting screw
Necesarios: 1
securing throttle linkage to inlet manifold
Necesarios: 2
Throttle linkage and choke cable bracket to inlet manifold
Necesarios: 6
Throttle linkage and choke cable bracket to inlet manifold
Necesarios: 6
throttle linkage to inlet manifold
TR5, TR6 to engine no. CP26804
Necesarios: 3
control rod, upper
TR5, TR6 to engine no. CP26804
Necesarios: 3
control rod, lower
TR5, TR6 to engine no. CP26804
Necesarios: 3
TR5, TR6 to engine no. CP26804
Necesarios: 6
with joints - throttle linkage to inlet manifold
TR6 from engine no. CP26805.
May replace all earlier versions
Necesarios: 3
control rod, upper
TR6 from engine no. CP26805.
May replace all earlier versions
Necesarios: 3
control rod, lower
TR6 from engine no. CP26805.
May replace all earlier versions
Necesarios: 3
TR6 from engine no. CP26805.
May replace all earlier versions
Necesarios: 9
TR6 from engine no. CP26805.
May replace all earlier versions
Necesarios: 6
TR6 from engine no. CP26805.
May replace all earlier versions
Necesarios: 6
upper joint
TR6 from engine no. CP26805.
May replace all earlier versions
Necesarios: 3
LHD
Necesarios: 1
accelerator cable to battery retaining bar
LHD
Necesarios: 1
clamping accelerator cable to pedal
LHD
Necesarios: 1
pedal shaft
LHD
Necesarios: 1
accelerator pedal shaft
RHD
Necesarios: 1
