Essieu avant
sans bagues
Requis: 1
BN1 and BN2. BN4 and BN6 to 35076 (LHD) and to 35826 (RHD)
Requis: 2
BN4 and BN6 from 35077 (LHD) and from 35827 (RHD), BN7, BT7, BJ7 and BJ8
Requis: 2
BSF thread
BN1
Only in connection with the original bump stop
Requis: 4
LH front and RH rear - new item
BN2 - BJ8
Requis: 2
LH front and RH rear - used item
BN2 - BJ8
Requis: 2
RH front and LH rear - new item
BN2 - BJ8
Requis: 2
RH front and LH rear - used item
BN2 - BJ8
Requis: 2
wishbone, inner - original specification
Requis: 8
In addition you need nut 212114 (ill. 28)
Requis: 2
BSF thread
BN1. Only in connection with the original king pin
Requis: 2
UNF thread. May replace original slotted nut
BN2 to BJ8
Requis: 2
king pin - characteristic: BSF thread
BN1. Only in connection with the original king pin
Requis: 2
BN1, only in connection with the original king pin
Requis: 2
BSF thread
BN1. Only in connection with the original king pin
Requis: 2
king pin - characteristic: UNF thread
BN2 to BJ8
Requis: 2
king pin - lower
BN1, BN2, BN4, BN6, BN7 and BT7, BJ7 to 21766
Requis: 2
king pin - lower
BJ7 from 21767, BJ8
My replace by dust tube 25302 if not available
Requis: 2
used item - identify by BSF thread
BN1 to 221403
Requis: 2
BN1 de 221404 (peut également être utilisé pour les modèles antérieurs)
Requis: 2
BN2, BN4, BN6, BN7, BT7 et BJ7, BJ8 à 26704 (1955-64)
Requis: 2
BN2
Requis: 2
BN4, BN6, BN7 et BT7, BJ7 jusqu'à 21766
Requis: 2
used item - identify by UNF thread
BJ7 from 21767, BJ8 to 26704
Requis: 2
LH wheel hub to stub axle
BN7, BT7 and BJ7, BJ8 to 26704
Requis: 1
RH wheel hub to stub axle
BN7, BT7 and BJ7, BJ8 to 26704
Requis: 1
steering lever to stub axle - length: 3.1/4"
BN2, BN4 and BN6
Requis: 2
steering lever to stub axle - length: 3.1/2"
BN2, BN4 and BN6
Requis: 2
steering lever to stub axle - length: 3.1/2"
BN7, BT7 and BJ7, BJ8 to 26704
Requis: 2
steering lever to stub axle - length: 4"
BN7, BT7, and BJ7, BJ8 to 26704
Requis: 2
(inner wheel bearing)
BN4 and BN6 - with disc wheels
Requis: 2
BN2, BN4 et BN6 avec roues à rayons (1955-59) et toutes les BN7, BT7, BJ7 et BJ8 (1959-68)
Requis: 2
wheel bearing
BN1
Requis: 2
roulement de roue
BN2, BN4, BN6, BN7, BT7 et BJ7 (1956-63) ainsi que BJ8 à 26704 (1963-64)
Requis: 2
BN2, BN4 et BN6 avec roues à rayons (1955-59), tous les BN7, BT7 et BJ7 ainsi que BJ8 à 26704 (1959-64)
Requis: 2
wheel bearing - characteristic: BSF thread
BN1 to 221403
Requis: 2
wheel bearing - characteristic: UNF thread
BN1 from 221404, BN2 to BJ8
Requis: 2
wheel hub
BN4 and BN6 - with disc wheels
Requis: 2
wheel hub
BN7, BT7, BJ7 and BJ8 - with disc wheels
Requis: 2
new item
BN4 and BN6 - with disc wheels
Requis: 2
new item
BN7, BT7 and BJ7, BJ8 to 26704 - with disc wheels
Requis: 2
used item
BN7, BT7 and BJ7, BJ8 to 26704 - with disc wheels
Requis: 2
BN7, BT7 and BJ7; BJ8 to 26704 - with disc wheels
Requis: 10
new item
BJ8 from 26705 - with disc wheels
Requis: 2
brake drum to wheel hub
BN4 and BN6 - with disc wheel
Requis: 10
brake disc to hub
BN7, BT7, BJ7 and BJ8 - with disc wheels
Requis: 10
Train avant, gauche, 12 TPI, logement de 42 mm
BN1
Requis: 1
Train avant, droit, 12 TPI, logement de 42 mm
BN1
Requis: 1
train avant, gauche, 12 TPI
BN2, BN4 et BN6 (1955-59)
Requis: 1
train avant, droite, 12 TPI
BN2, BN4 et BN6 (1955-59)
Requis: 1
train avant, gauche, 12 TPI
BN7, BT7 et BJ7 ainsi que BJ8 à 26704 (1959-64)
Requis: 1
train avant, droit, 12 TPI
BN7, BT7 et BJ7 ainsi que BJ8 à 26704 (1959-64)
Requis: 1
train avant, droite, 8 TPI
BJ8 à partir 26705
Requis: 1
wire wheel hub to brake disc
BN7, BT7 and BJ7. BJ8 to 26704
Requis: 10
wire wheel hub to brake drum
BN1, BN2, BN4 and BN6
Requis: 8
wire wheel hub to brake disc
BJ8 from 26705
Requis: 10
self locking - wire wheel hub to brake drum
BN1
Requis: 8
wire wheel hub to brake disc
BN7, BT7 and BJ7. BJ8 to 26704
Requis: 10
essieu avant - piece nouveau. Reconstruction avec dôme
Requis: 2
essieu avant - version d´origine sans dôme, en échange. Attention: on peut accepter que les amortisseurs d´origine ce qui veut dire le modèle sans dôme supplémentaire
Requis: 2
SAE 20W
Requis: 1
Contenu : 500 ml (24,00 €* / 1000 ml)
pivots de fusée supérieurs pour toutes les Big Healey, permet un réglage précis au millimètre de la cambrure sans démontage
Requis: 1
essieu avant - 3/4”, exécution renforcée
BN1 jusqu'à BJ8
Requis: 1
essieu avant - 7/8”, exécution renforcée avec kit de fixation
BN1 jusqu'à BJ8
Requis: 1
barre antiroulis d' essieu avant, 9/16" de diamètre
Requis: 2
barre antiroulis d' essieu avant, 9/16" de diamètre
Requis: 2
barre antiroulis d' essieu avant, 5/8"
Requis: 2
barre antiroulis d' essieu avant, 5/8"
Requis: 2
barre antiroulis d' essieu avant, 3/4"
Requis: 2
barre antiroulis d' essieu avant, 3/4"
Requis: 2
stub axle - characteristic: BSF thread
BN1 to 221403 - with genuine stub axle
Requis: 2
stub axle - characteristic: UNF thread
BN1 from 221404, BN2 to BJ8
Requis: 2
L’axe de fusée supérieur remplace la rondelle en bronze. Kit pour le train avant
Requis: 1