-
Extracteur
pour moyeu de roue arrière. Outil spécial pour changer le palier arrière étant donné que ceci n'est pas possible avec un outil standardRef. no.: 394462Pièce: 185,19 € TVA inclue
frais de port en sus- Sur ma liste d'envies
-
Jeu d'outils
pour carburateur SU, 3 pièces (y compris outil pour réglage du porte-injecteur)Ref. no.: 20661Set: 21,18 € TVA inclue
frais de port en sus- Sur ma liste d'envies
-
Clé de réglage
pour la régulation du mélange au ralenti dans le carburateur Zenith-Stromberg. Outil spécial nécessaire pour l’ajustage du gicleur réglagble dans les carburateurs de type CDThis device is used on adjustable needle (top adjustment) carburettors of the early CD type. After removal of the damper unit from the carburettor top, the tool is inserted into the damper reservoir. The central Allen key locates in a socket in the reservoir base, while the outer barrel locks into the air valve guide rod. Rotating the Allen key clockwise will raise the needle to enrich the mixture, anti-clockwise will lower the needle. The location of the outer barrel is important in order to prevent the air valve from rotating when the adjustment is being carried out, thus damaging the carburettor main diaphragm.Ref. no.: 19067Pièce: 19,16 € TVA inclue
frais de port en sus- Sur ma liste d'envies
-
Clé de réglage
pour la régulation du mélange au ralenti dans le carburateur Zenith-Stromberg.
Outil spécial nécessaire pour l’ajustage du gicleur réglagble dans les carburateurs de type CD.This device is used on adjustable needle (top adjustment) carburettors of the later CD type. After removal on the damper unit from the carburettor top, the tool is inserted into the damper reservoir. The central slot locates in a socket in the reservoir base, while the outer barrel locks into the air valve guide rod. Rotating the Allen key clockwise will raise the needle to enrich the mixture, anti-clockwise rotation will lower the needle. The location of the outer barrel is important in order to prevent the air valve from rotating when the adjustment is being carried out, thus damaging the carburettor main diaphragm.Ref. no.: 294154Pièce: 19,16 € TVA inclue
frais de port en sus- Sur ma liste d'envies
-
Mandrin de centrage
embrayageMK3, MK4 and MK4 1500 USA spec.Ref. no.: 16585Pièce: 16,84 € TVA inclue
frais de port en sus- Sur ma liste d'envies
-
Mandrin de centrage
clutch, Identification: 20 splines, shaft length: 33.2 mm1500Ref. no.: 16586Pièce: 16,84 € TVA inclue
frais de port en sus- Sur ma liste d'envies
-
Tendeur de ressort
envergure: 190 mm. Set de 2 pièces pour un ressorRef. no.: 311484Paire: 46,20 € TVA inclue
frais de port en sus- Sur ma liste d'envies
-
Presse à graisse et à huile
"Double Action", 100 ml convientRef. no.: 258249Pièce: 17,75 € TVA inclue
frais de port en sus- Sur ma liste d'envies