Asse anteriore
without bushes
Richiesto: 1
BN1 and BN2. BN4 and BN6 to 35076 (LHD) and to 35826 (RHD)
Richiesto: 2
BN4 and BN6 from 35077 (LHD) and from 35827 (RHD), BN7, BT7, BJ7 and BJ8
Richiesto: 2
BSF thread
BN1
Only in connection with the original bump stop
Richiesto: 4
LH front and RH rear - new item
BN2 - BJ8
Richiesto: 2
LH front and RH rear - used item
BN2 - BJ8
Richiesto: 2
RH front and LH rear - new item
BN2 - BJ8
Richiesto: 2
RH front and LH rear - used item
BN2 - BJ8
Richiesto: 2
wishbone to chassis frame. With washer and nyloc nut assembly
Contains illustrations 14, 15 and 16
Richiesto: 4
wishbone, inner - original specification
Richiesto: 8
BSF thread
BN1. Only in connection with the original king pin
Richiesto: 2
UNF thread. May replace original slotted nut
BN2 to BJ8
Richiesto: 2
king pin - characteristic: BSF thread
BN1. Only in connection with the original king pin
Richiesto: 2
BN1, only in connection with the original king pin
Richiesto: 2
BSF thread
BN1. Only in connection with the original king pin
Richiesto: 2
king pin - characteristic: UNF thread
BN2 to BJ8
Richiesto: 2
king pin - lower
BN1, BN2, BN4, BN6, BN7 and BT7, BJ7 to 21766
Richiesto: 2
king pin - lower
BJ7 from 21767, BJ8
My replace by dust tube 25302 if not available
Richiesto: 2
used item - identify by BSF thread
BN1 to 221403
Richiesto: 2
new item - identify by UNF thread
BN1 from 221404 (can also be used for earlier models)
Richiesto: 2
competition type - identify by UNF thread
BN2, BN4, BN6, BN7, BT7 and BJ7, BJ8 to 26704 (1955-64)
Richiesto: 2
used item - identify by UNF thread
BN2
Richiesto: 2
used item - identify by UNF thread
BN4, BN6, BN7 and BT7, BJ7 to 21766
Richiesto: 2
used item - identify by UNF thread
BJ7 from 21767, BJ8 to 26704
Richiesto: 2
new - supplied in pairs
BJ8 from 26705 (1964-68)
Richiesto: 1
LH wheel hub to stub axle
BN7, BT7 and BJ7, BJ8 to 26704
Richiesto: 1
RH wheel hub to stub axle
BN7, BT7 and BJ7, BJ8 to 26704
Richiesto: 1
steering lever to stub axle - length: 3.1/4"
BN2, BN4 and BN6
Richiesto: 2
steering lever to stub axle - length: 3.1/2"
BN2, BN4 and BN6
Richiesto: 2
steering lever to stub axle - length: 3.1/2"
BN7, BT7 and BJ7, BJ8 to 26704
Richiesto: 2
steering lever to stub axle - length: 4"
BN7, BT7, and BJ7, BJ8 to 26704
Richiesto: 2
steering lever to stub axle - length: 1.1/4"
BJ8 from 26705 (1964-68)
Richiesto: 2
steering lever to stub axle - length: 3.1/2"
BJ8 from 26705 (1964-68)
Richiesto: 2
adapter to stub axle
BN7, BT7 and BJ7, BJ8 to 26704
Richiesto: 4
(inner wheel bearing)
BN4 and BN6 - with disc wheels
Richiesto: 2
inner
BN2, BN4 and BN6 with wire wheels (1955-59) plus all BN7, BT7, BJ7 and BJ8 (1959-68)
Richiesto: 2
wheel bearing
BN1
Richiesto: 2
wheel bearing
BN2, BN4, BN6, BN7, BT7 and BJ7 (1956-63) plus BJ8 to 26704 (1963-64)
Richiesto: 2
outer
BN4 and BN6 - with disc wheels
Richiesto: 2
outer
BN2, BN4 and BN6 with wire wheels (1955-59), all BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Richiesto: 2
front suspension - outer bearing
BJ8 from 26705
Richiesto: 2
front wheel bearing - thickness: 0.003", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.005", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.010", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.030", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.003", diameter: 3/4"
BJ8 from 26705
front wheel bearing - thickness: 0.005", diameter: 3/4"
BJ8 from 26705
front wheel bearing - thickness: 0.01", diameter: 3/4"
BJ8 from 26705
front wheel bearing - thickness: 0.030", diameter: 3/4"
BJ8 from 26705
wheel bearing - characteristic: BSF thread
BN1 to 221403
Richiesto: 2
wheel bearing - characteristic: UNF thread
BN1 from 221404, BN2 to BJ8
Richiesto: 2
wheel hub
BN4 and BN6 - with disc wheels
Richiesto: 2
wheel hub
BN7, BT7, BJ7 and BJ8 - with disc wheels
Richiesto: 2
new item
BN4 and BN6 - with disc wheels
Richiesto: 2
new item
BN7, BT7 and BJ7, BJ8 to 26704 - with disc wheels
Richiesto: 2
used item
BN7, BT7 and BJ7, BJ8 to 26704 - with disc wheels
Richiesto: 2
BN7, BT7 and BJ7; BJ8 to 26704 - with disc wheels
Richiesto: 10
new item
BJ8 from 26705 - with disc wheels
Richiesto: 2
brake drum to wheel hub
BN4 and BN6 - with disc wheel
Richiesto: 10
brake disc to hub
BN7, BT7, BJ7 and BJ8 - with disc wheels
Richiesto: 10
BN7, BT7, BJ7 and BJ8 - with disc wheels
Richiesto: 10
LH front - characteristic: 12 TPI, 42 mm
BN1
Richiesto: 1
RH front - characteristic: 12 TPI, 42 mm
BN1
Richiesto: 1
LH front - characteristic: 12 TPI
BN2, BN4 and BN6 (1955-59)
Richiesto: 1
RH front - characteristic: 12 TPI
BN2, BN4 and BN6 (1955-59)
Richiesto: 1
LH front - characteristic: 12 TPI
BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Richiesto: 1
RH front - characteristic: 12 TPI
BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Richiesto: 1
LH front - characteristic: 8 TPI
BJ8 from 26705
Richiesto: 1
RH front - characteristic: 8 TPI
BJ8 from 26705
Richiesto: 1
wire wheel hub to brake drum
BN2, BN4 and BN6
Richiesto: 10
wire wheel hub to brake disc
BN7, BT7 and BJ7. BJ8 to 26704
Richiesto: 10
wire wheel hub to brake drum
BN1, BN2, BN4 and BN6
Richiesto: 8
wire wheel hub to brake disc
BJ8 from 26705
Richiesto: 10
self locking - wire wheel hub to brake drum
BN1
Richiesto: 8
wire wheel hub to brake disc
BN7, BT7 and BJ7. BJ8 to 26704
Richiesto: 10
wire wheel hub
BN1 to BJ7, BJ8 to 26704
Richiesto: 2
for wire wheel hub
BJ8 from 26705
Richiesto: 2
front - new item. Reproduction with cylindric domed extension
Richiesto: 2
front suspension - original specification without cylindric domed extension, in exchange. Please notice: Only the original shock absorber without this domed extension can be reconditioned. As we can't refurbish the domed shock absorbers, we are not going to take these reproductions in exchange
Richiesto: 2
SAE 20W
Richiesto: 1
Contenuto: 500 ml (24,00 €* / 1000 ml)
May replace slotted nut 4834 and split pin 3269
Richiesto: 2
with inner sleeve, front top trunnion
Richiesto: 4
kit di bussole supporto oscillante di sopra, permette una regolazione millimetrica all’inclinazione senza smontaggio
Richiesto: 1
5/8"
Original equipment on BN4 to BJ8 models, also suitable for BN1 and BN2
Richiesto: 1
front - improved version with 3/4” diameter
BN1 to BJ8
Richiesto: 1
front - improved version with 7/8" diameter plus fitting kit
BN1 to BJ8
Richiesto: 1
front anti roll bar - 9/16" diameter
BN1 and BN2 with 9/16” anti roll bar
Richiesto: 2
front anti roll bar - 9/16" diamater
BN1 and BN2
Richiesto: 2
front anti roll bar - 5/8"
BN1 to BJ8 with 5/8” anti roll bar
Richiesto: 2
front anti roll bar - 5/8"
BN1 to BJ8
Richiesto: 2
front anti roll bar - 3/4"
BN1 to BJ8 with 3/4” anti roll bar
Richiesto: 2
front anti roll bar - 3/4"
BN1 to BJ8
Richiesto: 2
front suspension. Including rubber bushes, washers and nuts
Contains illustrations 94, 95 and 96
Richiesto: 2
stub axle - characteristic: BSF thread
BN1 to 221403 - with genuine stub axle
Richiesto: 2
stub axle - characteristic: UNF thread
BN1 from 221404, BN2 to BJ8
Richiesto: 2
replaces bronze thrust washer in the top trunnion. Complete car set
Richiesto: 1