Sospensione anteriore MKII e DV8
with inner sleeve, inner position, front upper wishbone
Richiesto: 4
securing upper wishbone levers to fulcrum shafts
Per wishbone
Richiesto: 2
del braccio della sospensione, anteriore
Richiesto: 2
for upper swivel fitted with grease nipple - black
Richiesto: 5
shorter - ball joint to upper wishbone
Per ball joint
Richiesto: 1
longer - ball joint to upper wishbone
Per ball joint
Richiesto: 1
lower wishbone - front suspension
Per wishbone
Richiesto: 4
lower wishbone - front suspension
Richiesto: 4
lower wishbone - front suspension. Variant with inner sleeve
Per wishbone
Richiesto: 2
securing lower wishbone levers to fulcrum shaft
Per wishbone
Richiesto: 2
for lower pin cap
Per ball joint. Use with SJ3146/1
Richiesto: 4
del braccio della sospensione - anteriore
Richiesto: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Richiesto: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Richiesto: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Richiesto: 2
for lower pin cap
Per ball joint. For original type only
Richiesto: 4
on stub axle
Later type..Quote chassis no.
Richiesto: 2
at front of front crossmember - aftermarket
Richiesto: 2
at rear of front crossmember - aftermarket
Richiesto: 2
at rear of front crossmember
Richiesto: 2
front suspension
Mark II 3.4, 3.8 and 340 (1959-69)
Richiesto: 2
fron suspension
Mark II 2.4 and 240 (1959-69) • Daimler 250 V8 Saloon (1962-69)
Richiesto: 2
securing spring to lower wishbone
Not pointed as original
Richiesto: 2
front shock absorber
Comprises bushes, washers & nuts
Richiesto: 2
outer - with track rod ends assembly. Adjustable type suits both sides
Richiesto: 1
LH side
Richiesto: 1
outer - with track rod ends assembly. Adjustable type suits both sides
Richiesto: 1
RH side
Richiesto: 1
track rod end - made from clear nylon
Richiesto: 2
upper and lower swivel gaiter and track rod end gaiter
Richiesto: 2
and pin for centre steering rod end - standard version
Richiesto: 2
and pin for centre steering rod end - uprated version
Richiesto: 2
securing pin and bush to drop arm & idler lever
Richiesto: 2
centre steering rod, RH side. For vehicles without power assisted steering - reconditioned, in exchange
Richiesto: 1
centre steering rod, LH side. For vehicles without power assisted steering - reconditioned, in exchange
Not power assisted steering. Pin cannot be changed
Richiesto: 1
centre steering rod, RH side. For vehicles with power assisted steering - reconditioned, in exchange
Power assisted steering
Richiesto: 1
centre steering rod, LH side. For vehicles with power assisted steering - reconditioned, in exchange
Power assisted steering
Richiesto: 1
front anti roll bar - identify by 13/16" inner diameter
Richiesto: 2
for anti roll bar bush, outer position with 32 mm outer diameter and 10.3 mm hole diameter
Richiesto: 2
for anti roll bar bush, inner position with 32 mm outer diameter and 11.3 mm hole diameter
Richiesto: 2
centre - complete unit with track rod ends
Richiesto: 1
front suspension
Adjustable, The first step to improving the handling of your Mark II is to fit uprated shock absorbers and, the fitting of either Spax or Koni units is highly recommended. Units are sold individually, but, should be fitted in axle pairs.
Richiesto: 2