Impianto idraulico dei freni - sistema frenante a doppio circuito Separazione anteriore/posteriore
0,70" bore size
1275GT (not UK) with 10" wheels, Innocenti Cooper 1300
Identification: round plastic reservoir
Richiesto: 1
for master brake cylinder 289088, 0.70" bore size
Richiesto: 1
0.70" and 0.75" stepped bore size, with senor in filler cap, metric fittings M10 + M12, yellow band
848/998 cc 10/1978 on (Europe 1980 on)
replaces 1978 to 1985 types (pre yellow band) with imperial fittings, for this cars adapter pipes 306305 for RHD, 306306 for LHD are necessary
Richiesto: 1
0.70" and 0.75" stepped bore, no reservoir fitted, metric fittings M10 + M12
848/998 cc 10/1978 on (Europe 1980 on)
replaces 1978 to 1985 types (pre yellow band) with imperial fittings, for this cars adapter pipes 306305 for RHD, 306306 for LHD are necessary
Richiesto: 1
for conversion to master brake cylinder 214936
LHD
if master brake cylinder with 2 equal fittings M10 would be replaced by cylinder 214936 with unequal fittings M10 + M12
Richiesto: 1
for conversion to master brake cylinder 214936
RHD
if master brake cylinder with 2 equal fittings M10 would be replaced by cylinder 214936 with unequal fittings M10 + M12
Richiesto: 1
for genuine master brake cylinder GMC173/198/192/195. 0.70" bore size
upto 1985
Identification: equal fittings M10, black indentification band
Richiesto: 1
for master brake cylinder 214936, 0.70" and 0.75" stepped bore size
1985 on, earlier when fitted
Identification: unequal fittings M10 + M12, yellow indentification band
Richiesto: 1
for genuine master brake cylinder GMC173/198
if switch for brake pressure faillure on master cylinder body
Richiesto: 1
with sensor, for genuine master brake cylinder GMC192/195 and master cylinder 214936
if no switch for brake pressure faillure on master cylinder body
Richiesto: 1
brake pressure failure, for genuine master brake cylinder GMC173/198
on body master brake cylinder
Richiesto: 1
for genuine master brake cylinder GMC173/192/186/198
Richiesto: 1
push rod brake master cylinder to pedal
Richiesto: 1
LHD
post 1976, (V)124424 on
Richiesto: 1
for brake pedal
not automatic cars
Richiesto: 1
1976 (V)124423 on, up to (V) BD498952
could alternative be used on later cars
Richiesto: 1
(V) BD498953 on
alternative 13933 could be used
Richiesto: 1
for rear brakes, fitted to subframe
all Cooper S
Richiesto: 1
for rear brakes, fitted to subframe
848/998 cc
Richiesto: 1
for rear brake, fitted on bulkhead
1978 on
Richiesto: 1
mechanical, fitted to pedal box
Richiesto: 1
