Cambio - componenti interni
gearbox - for clutch plate with 10 splines
Twin Cam, De Luxe, 1500 and 1600, 1622 to engine no. 16GC-3928
Richiesto: 1
gearbox - for clutch plate with 23 splines
1622 from engine no. 16GC-3929
Richiesto: 1
ball bearing
Richiesto: 1
first motion shaft needle bearing
Richiesto: 18
1500 to engine no. 15GB-10989
Richiesto: 1
1500 from engine no. 15GB-10990 to 15GB-51767
Richiesto: 1
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Richiesto: 1
in mainshaft - for front thrust washer
Richiesto: 1
for locking pin
Richiesto: 1
3rd and 4th speed - used item
Richiesto: 1
3rd speed gear
Richiesto: 1
2nd speed - original type
May replaced by gear 1179 and baulk ring 8875 if not available
Richiesto: 1
2nd speed - original brass type
May replaced by gear 1179 and baulk ring 8875 if not available
Richiesto: 1
2nd speed - steel type
May be used with improved gear 1179
Richiesto: 1
mainshaft rear
Richiesto: 1
1st speed, with 2nd speed synchronizer assembly
Richiesto: 1
1st speed gear
Richiesto: 1
2nd speed
Richiesto: 1
bearing housing
Richiesto: 1
for speedometer gear - new item
Richiesto: 1
speedometer pinion
1500 to engine no. 15GB-10989
Richiesto: 1
speedometer pinion gear
1500 to engine no. 15GB-10989
Richiesto: 1
speedometer pinion gear to mainshaft
1500 to engine no. 15GB-10989
Richiesto: 1
speedometer pinion
1500 from engine no. 15GB-10990 to 15GB-51767
Richiesto: 1
speedometer pinion gear
1500 from engine no. 15GB-10990 to 15GB-51767
Richiesto: 1
speedometer pinion gear to mainshaft
1500 from engine no. 15GB-10990 to 15GB-51767
Richiesto: 1
speedometer pinion
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Richiesto: 1
speedometer pinion gear
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Richiesto: 1
speedometer pinion gear to mainshaft
1500 from engine no. 15GD-101, all 1600, 1622, Twin Cam and De Luxe
Richiesto: 1
mainshaft
Richiesto: 1
reproduction with 0.643" diameter
Alternatives
Richiesto: 1
uprated type with 0.643" diameter
Richiesto: 1
interlocking
Richiesto: 1
reverse shaft
Richiesto: 1
reverse shaft. Please mote: needs modification, depending on the application
Richiesto: 1
for ball bearings
Richiesto: 1
Contenuto: 100 g (29,50 €* / 1000 g)
