Interior dos carburadores SU-HD8 - BJ8
piston return - paint colour on end coil: red/green
Necessário: 2
with piston
Necessário: 2
fixed type - marked: UH, standard
Necessário: 2
fixed type - marked: UL, weak
Necessário: 2
idle control - complete kit with spring and washers
Necessário: 2
front carburettor
Necessário: 1
rear carburettor
Necessário: 1
0.010" oversize
Necessário: 2
throttle spindle stop lever and lost motion lever
Necessário: 4
throttle spindle stop lever - outer
Necessário: 4
throttle spindle stop lever - inner
Necessário: 4
brass - fuel pipe to front carburettor
Necessário: 1
brass - fuel pipe to rear carburettor
Alternatives
Necessário: 1
steel - fuel pipe to rear carburettor
Alternatives
Necessário: 1
and spring - inside float chamber lid on SU carburettors
Necessário: 2
front carburettor
Copy with 2.3/8" diameter, please use with float lever 3141
Necessário: 1
rear carburettor
Copy with 2.3/8" diameter, please use with float lever 3141
Necessário: 1
float lid - with hexagonal zinc plated head
Necessário: 2
carburettor identification - blank
Necessário: 2
for SU carburettors - bore: 0.096"
Necessário: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Necessário: 2
flutuador - altura do suporte da tampa para suspensão do garfo: 1/4". Só cabe com a tampa original da câmara de flutuação
Necessário: 2
float
Use with float chamber lids 20669 and 20670
Necessário: 2
for single SU-HD8 type carburettor
Necessário: 2
services one SU-HD8 carburettor. Comprising service kit 200204 plus throttle disc and throttle spindle
Comprising service kit 200204 plus throttle disc and throttle spindle
Necessário: 2
for SU-HD8 carburettors. Chromed with 89 mm total height
Construction height: 89 mm
Necessário: 2
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Necessário: 4
