Controle do Motor - BN7 e BT7 com carburadores triplos SU
replacement with 147 cm length - characteristic: Black knob with "C" symbol in white
Necessário: 1
choke cable
Necessário: 1
choke cable
Necessário: 1
Necessário: 1
inner choke cable
Necessário: 1
outer choke cable
Necessário: 1
to front carburettor
Necessário: 1
to middle carburettor
Necessário: 1
to rear carburettor
Necessário: 1
used item
LHD
Necessário: 1
LHD
Necessário: 1
for accelerator pedal return spring on LHD models
Necessário: 1
RHD
Necessário: 1
pedal shaft - reinforced
Alternatives
Necessário: 1
for felt bush
Necessário: 1
pedal shaft
Necessário: 1
pedal shaft - reinforced
Alternatives
Necessário: 1
pedal shaft
To chassis no. 15103.
May be replaced by lever 201650 (ill. 50) in connection with screw 2826, spring washer 212194 and nut 2303
Necessário: 1
To chassis no. 15103.
May be replaced by lever 201650 (ill. 50) in connection with screw 2826, spring washer 212194 and nut 2303
Necessário: 1
To chassis no. 15103.
May be replaced by lever 201650 (ill. 50) in connection with screw 2826, spring washer 212194 and nut 2303
Necessário: 2
To chassis no. 15103.
May be replaced by lever 201650 (ill. 50) in connection with screw 2826, spring washer 212194 and nut 2303
Necessário: 1
From chassis no. 15104
Necessário: 1
accelerator pedal - length: 33 cm
Necessário: 1
throttle linkage coupling shaft - short
To chassis no. 14377
Necessário: 1
throttle linkage coupling shaft - long
To chassis no. 14377
Necessário: 1
throttle linkage
To chassis no. 14377
Necessário: 1
throttle linkage
LHD from chassis no. 14378
Necessário: 1
throttle linkage, complete with operating lever
RHD from chassis no. 14378
Necessário: 1
LHD
Necessário: 1
coupling shaft - reinforced
Alternatives
Necessário: 2
for felt bush
Necessário: 2
coupling shaft
Necessário: 2
throttle relay shaft
Necessário: 1
kick-down link
Necessário: 1
kick-down link
Necessário: 1
on kick-down switch
Necessário: 1
throttle linkage
To engine no. 29E-H928
Necessário: 1
throttle linkage
From engine no. 29E-H929
Necessário: 1
for throttle linkage bracket
Necessário: 2
Necessário: 1
Necessário: 2
Necessário: 2
Necessário: 1
throttle linkage
Necessário: 2
for carburettor return springs - two piece set for all 3 carburettors
Necessário: 1
rear carburettor return spring. May replaced by retainer plate 327205 if not available
Necessário: 1
front carburettor
Necessário: 1
rear carburettor
Necessário: 1
Necessário: 2
