Radiator, water pump, thermostat and fan belt MKII
new item with high performance copper core
2.4, 3.4 and 3.8 (1959-67): models with manual transmission and with DG250 automatic transmission
Required: 1
exchange item with standard copper core
2.4, 3.4 and 3.8 (1959-67): models with manual transmission and with DG250 automatic transmission
Required: 1
exchange item with high efficiency core
3.4, 3.8, 240 and 340 with BW35 automatic transmission (1967-69)
Required: 1
exchange item with high efficiency core
240 and 340 models with manual transmission (1967-69)
Required: 1
radiator - pressure: 4 PSI, 3/4" depth
4 lbs caps are fitted to most models. We can supply either 4 lbs or 7 lbs. In some circumstances it may be appropiate to fit a 13 lbs cap
Required: 1
radiator - pressure: 7 PSI, 3/4" depth
4 lbs caps are fitted to most models. We can supply either 4 lbs or 7 lbs. In some circumstances it may be appropiate to fit a 13 lbs cap
Required: 1
radiator - pressure: 13 PSI, 3/4" depth
4 lbs caps are fitted to most models. We can supply either 4 lbs or 7 lbs. In some circumstances it may be appropiate to fit a 13 lbs cap
Required: 1
radiator - brass type with 9/16" BSP thread
Required: 1
Kevlar reinforced
Mark II 2.4 (1959-63) - LHD models to chassis no. 127125 and RHD models to chassis no. 115182
Required: 1
Kevlar reinforced
Mark II 2.4 (1963-67) - LHD models from chassis no. 127126 RHD models from chassis no. 115183
Required: 1
Kevlar reinforced
Mark II 240 (1967-69)
Required: 1
Kevlar reinforced
Mark II 3.4 and 3.8 (1959-67)
Required: 1
Kevlar reinforced
Mark II 340 (1967-69)
Required: 1
top - manifold to radiator
2.4 from 115183 (RHD) and 127126 (LHD), all 3.4 and 3.8 models (1959-67)
Required: 1
bottom - radiator to water pump
3.4, 3.8 and 340 (1959-69)
Required: 1
13 x 925 mm
Single Belt 2.4. Early models. Quote engine no.
Required: 1
16 x 930 mm - duplex type
Mark II 2.4 from enginre no. BH5365 and all 240 models
Required: 1
Single belt 3.4/3.8. Early models. Quote engine no.
Required: 1
16 x 1040 mm - duplex type
Mark II (1963-69): 3.4 from engine no. KH4023, 3.8 from engine no. LC1672 and all 340 models
Required: 1
16 x 1075 mm - duplex type
Mark II (1963-69): 3.4 from engine no. KH4023, 3.8 from engine no. LC1672 and all 340 models
Required: 1
for "v" type fan belt
Mark II 3.4 to engine no. KH4022 and 3.8 to engine no. LC1671 (1959-63)
Required: 1
for "w" type (duplex) fan belt
Mark II 3.4 from engine no. KH4023, 3.8 from engine no. LC1672 and 340 from engine no. 7J50001 (1963-69)
Required: 1
water pump - characteristic: notch for 13 mm wide fan belt
Early type with single belt
Required: 1
11 blade competition plasctic type, diameter: 410 mm
Required: 1
tailor made kit with brackets, temperature contoler with loom, hoseclamps and fitting material. For negative earthed cars only! This 15.2" high power blowing fan must be fitted in front of the radiator
Required: 1
tailor made kit with brackets, temperature contoler with loom, hoseclamps and fitting material. For positive earthed cars only! This 15.2" high power blowing fan must be fitted in front of the radiator
Required: 1
