Front suspension
BN1 and BN2. BN4 and BN6 to 35076 (LHD) and to 35826 (RHD)
Required: 2
BN4 and BN6 from 35077 (LHD) and from 35827 (RHD), BN7, BT7, BJ7 and BJ8
Required: 2
BSF thread
BN1
Only in connection with the original bump stop
Required: 4
wishbone to chassis frame. With washer and nyloc nut assembly
Contains illustrations 14, 15 and 16
Required: 4
BSF thread
BN1. Only in connection with the original king pin
Required: 2
UNF thread. May replace original slotted nut
BN2 to BJ8
Required: 2
king pin - characteristic: BSF thread
BN1. Only in connection with the original king pin
Required: 2
BN1, only in connection with the original king pin
Required: 2
BSF thread
BN1. Only in connection with the original king pin
Required: 2
king pin - characteristic: UNF thread
BN2 to BJ8
Required: 2
king pin - lower
BN1, BN2, BN4, BN6, BN7 and BT7, BJ7 to 21766
Required: 2
king pin - lower
BJ7 from 21767, BJ8
My replace by dust tube 25302 if not available
Required: 2
used item - identify by BSF thread
BN1 to 221403
Required: 2
new item - identify by UNF thread
BN1 from 221404 (can also be used for earlier models)
Required: 2
competition type - identify by UNF thread
BN2, BN4, BN6, BN7, BT7 and BJ7, BJ8 to 26704 (1955-64)
Required: 2
used item - identify by UNF thread
BN2
Required: 2
used item - identify by UNF thread
BN4, BN6, BN7 and BT7, BJ7 to 21766
Required: 2
used item - identify by UNF thread
BJ7 from 21767, BJ8 to 26704
Required: 2
new - supplied in pairs
BJ8 from 26705 (1964-68)
Required: 1
LH wheel hub to stub axle
BN7, BT7 and BJ7, BJ8 to 26704
Required: 1
RH wheel hub to stub axle
BN7, BT7 and BJ7, BJ8 to 26704
Required: 1
steering lever to stub axle - length: 3.1/4"
BN2, BN4 and BN6
Required: 2
steering lever to stub axle - length: 3.1/2"
BN2, BN4 and BN6
Required: 2
steering lever to stub axle - length: 3.1/2"
BN7, BT7 and BJ7, BJ8 to 26704
Required: 2
steering lever to stub axle - length: 4"
BN7, BT7, and BJ7, BJ8 to 26704
Required: 2
steering lever to stub axle - length: 1.1/4"
BJ8 from 26705 (1964-68)
Required: 2
steering lever to stub axle - length: 3.1/2"
BJ8 from 26705 (1964-68)
Required: 2
(inner wheel bearing)
BN4 and BN6 - with disc wheels
Required: 2
inner
BN2, BN4 and BN6 with wire wheels (1955-59) plus all BN7, BT7, BJ7 and BJ8 (1959-68)
Required: 2
wheel bearing
BN1
Required: 2
wheel bearing
BN2, BN4, BN6, BN7, BT7 and BJ7 (1956-63) plus BJ8 to 26704 (1963-64)
Required: 2
outer
BN2, BN4 and BN6 with wire wheels (1955-59), all BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Required: 2
front suspension - outer bearing
BJ8 from 26705
Required: 2
front wheel bearing - thickness: 0.003", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.005", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.010", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.030", diameter: 7/8"
BN2 to BJ7, BJ8 to 26704
front wheel bearing - thickness: 0.003", diameter: 3/4"
BJ8 from 26705
front wheel bearing - thickness: 0.005", diameter: 3/4"
BJ8 from 26705
front wheel bearing - thickness: 0.01", diameter: 3/4"
BJ8 from 26705
front wheel bearing - thickness: 0.030", diameter: 3/4"
BJ8 from 26705
wheel bearing - characteristic: BSF thread
BN1 to 221403
Required: 2
wheel bearing - characteristic: UNF thread
BN1 from 221404, BN2 to BJ8
Required: 2
wheel hub
BN4 and BN6 - with disc wheels
Required: 2
wheel hub
BN7, BT7, BJ7 and BJ8 - with disc wheels
Required: 2
new item
BN4 and BN6 - with disc wheels
Required: 2
new item
BN7, BT7 and BJ7, BJ8 to 26704 - with disc wheels
Required: 2
used item
BN7, BT7 and BJ7, BJ8 to 26704 - with disc wheels
Required: 2
BN7, BT7 and BJ7; BJ8 to 26704 - with disc wheels
Required: 10
new item
BJ8 from 26705 - with disc wheels
Required: 2
brake drum to wheel hub
BN4 and BN6 - with disc wheel
Required: 10
brake disc to hub
BN7, BT7, BJ7 and BJ8 - with disc wheels
Required: 10
LH front - characteristic: 12 TPI, 42 mm
BN1
Required: 1
RH front - characteristic: 12 TPI, 42 mm
BN1
Required: 1
LH front - characteristic: 12 TPI
BN2, BN4 and BN6 (1955-59)
Required: 1
RH front - characteristic: 12 TPI
BN2, BN4 and BN6 (1955-59)
Required: 1
LH front - characteristic: 12 TPI
BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Required: 1
RH front - characteristic: 12 TPI
BN7, BT7 and BJ7 plus BJ8 to 26704 (1959-64)
Required: 1
LH front - characteristic: 8 TPI
BJ8 from 26705
Required: 1
RH front - characteristic: 8 TPI
BJ8 from 26705
Required: 1
wire wheel hub to brake disc
BN7, BT7 and BJ7. BJ8 to 26704
Required: 10
wire wheel hub to brake drum
BN1, BN2, BN4 and BN6
Required: 8
self locking - wire wheel hub to brake drum
BN1
Required: 8
wire wheel hub to brake disc
BN7, BT7 and BJ7. BJ8 to 26704
Required: 10
front - new item. Reproduction with cylindric domed extension
Required: 2
front suspension - original specification without cylindric domed extension, in exchange. Please notice: Only the original shock absorber without this domed extension can be reconditioned. As we can't refurbish the domed shock absorbers, we are not going to take these reproductions in exchange
Required: 2
SAE 20W
Required: 1
Content: 500 ml (€24.00 / 1000 ml)
with top trunnion fulcrum pin - complete car set. The eccentric fulcrum pin enables you to set the front suspension to negative camber without disassembling.
Required: 1
5/8"
Original equipment on BN4 to BJ8 models, also suitable for BN1 and BN2
Required: 1
front - improved version with 3/4” diameter
BN1 to BJ8
Required: 1
front - improved version with 7/8" diameter plus fitting kit
BN1 to BJ8
Required: 1
front anti roll bar - 9/16" diameter
BN1 and BN2 with 9/16” anti roll bar
Required: 2
front anti roll bar - 9/16" diamater
BN1 and BN2
Required: 2
front anti roll bar - 5/8"
BN1 to BJ8 with 5/8” anti roll bar
Required: 2
front anti roll bar - 3/4"
BN1 to BJ8 with 3/4” anti roll bar
Required: 2
front suspension. Including rubber bushes, washers and nuts
Contains illustrations 94, 95 and 96
Required: 2
stub axle - characteristic: BSF thread
BN1 to 221403 - with genuine stub axle
Required: 2
stub axle - characteristic: UNF thread
BN1 from 221404, BN2 to BJ8
Required: 2
replaces bronze thrust washer in the top trunnion. Complete car set
Required: 1