Inner body repair panels, rear section - 3.8 Series 1 "Flat Floor" OTS (1961-62)
'flat floor' complete unit with inner sills, crossmember an cups for radius arms
Required: 1
RH side. "FLAT FLOOR" with cups for radius arms
Required: 1
RH side. "FLAT FLOOR" without cups for radius arms
Required: 1
LH side. "FLAT FLOOR" with cups for radius arms
Required: 1
LH side. "FLAT FLOOR" without cups for radius arms
Required: 1
front part, right side. "FLAT FLOOR" with part inside sill
Required: 1
front part, left side. "FLAT FLOOR" with part inside sill
Required: 1
complete square panel for LH and RH footwell
Required: 1
floor to RH side frame - two piece set
Required: 1
floor to LH side frame - two piece set
Required: 1
above rear suspension. Variant with cut-out for direct access to rear brake calipers
Required: 1
above rear suspension. Variant without cut-out for direct access to rear brake calipers
Required: 1
RH. Incorporates RH mounting for hood sticks
Required: 1
LH. Incorporates RH mounting for hood sticks
Required: 1
with inner sills, cross member, propshaft tunnel and rear upper floor panel
Required: 1