Oil sump 4.2 litre
original type - reconditioned, in exchange
Original type
Required: 1
assembly
May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 3)
Required: 1
assembly. High quality aftermarket product
May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 3)
Required: 1
oil suction pipe. Required to fit oil suction pipe to our high output oil pumps 480724 and 3988
Required: 1
oil pump
Required: 1
on oil pump - supporting suction pipe
Required: 1
oil pump to bearing cap. Identify by: 81.4 mm length
Required: 2
oil pump to bearing cap. Identify by: 57 mm length
Required: 1
oil pump
Required: 1
to oil pump - uprated variant with 3/4" diameter
Required: 1
suction pipe, oil sump to oil pump
Required: 1
measuring range: 8.1/2" and 1.1/4"
E-Type Series 1 and 1.5 (1961-68)
Required: 1
E-Type 4.2 Seriew 2: OTS and FHC from engine no.: 7R1001, 2+2 from engine no.: 7R35001 (1968-70)
Required: 1
for oil dipsitck - made from red plastic
E-Type 4.2 Seriew 2: OTS and FHC from engine no.: 7R1001, 2+2 from engine no.: 7R35001 (1968-70)
Required: 1
two-piece - modern high tech cometic version
Required: 1
crankshaft rear - made from rubber
Required: 1
crankshaft rear - modern high tech version
Required: 1
aluminium reproduction for wet lubrication system
Required: 1
crankshaft front. Please note: must be fitted in conjunction with distance piece 204336. The oil thrower must be discarded
Required: 1
on oil sump
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 to October 1968: OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388
Required: 1
retaining timing pinter to sump
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 to October 1968: OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388
Required: 2
recuring timing pinter to sump
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 to October 1968: OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388
Required: 2
retaining timing pinter to sump
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 to October 1968: OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388
Required: 2
retaining oil sump to cylinder block
Required: 26
retaining oil sump to cylinder block - length: 3/4"
Required: 25
retaining oil sump to cylinder block - length: 5/8"
Required: 1
retaining strainer to oil sump
Required: 6
oil filter to oil return pipe - length: 15 cm
Required: 1
Securing oil return pipe to sump
Required: 2
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
4.2 to engine no. 7R1914 (OTS and FHC) and to 7R35388 (2+2)
Required: 1
including oil seals
4.2 from engine no. 7R1915 (OTS and FHC) and from 7R35388 (2+2)
Required: 1
suction pipe to bearing cap
Required: 1
Required: 1
