Throttle body and ram pipes
engine breather
Required: 1
engine breather - air valve to air pipe
Models with air condition
Required: 1
engine breather - air valve to air condition
Models with air condition
Required: 1
plenum chamber
Models with 22D and 23D engines
Required: 1
plenum chamber
All models except 22D and 23D engines
Required: 1
plenum chamber
Models witht 22D and 23D engines
Required: 1
plenum chamber
All models except 22D and 23D engines
Required: 1
V8 modelle with 3,5 liter engines
Required: 1
V8 models with 31D engines
Required: 1
V8 models with 3,9 and 4,2 liter engines
Required: 1
under throttle valve housing. With coolant pipes - air intake pre heating
Required: 1
cold start
3.5 V8 Efi and 3.9 V8 Efi with Lucas L-Jetronics fuel injection from VIN...CA167942 to HA610293 (1985-91)
Required: 1
throttle valve housing
To July 1987
Required: 1
to idler control housing
V8 models with 3.5 liter engines
Required: 1
to idler control housing
V8 models with 3.9 liter engines
Required: 1
air intake pre heating - inlet
Models with 3.5 liter engines
Required: 1
air intake pre heating - inlet
Models with 3.5 liter and 31D engines
Required: 1
air intake pre heating - inlet
Models with 3.9 liter engines
Required: 1
worm type with 9 mm width - for hoses with 12-14 mm outer diameter
Required: 4
engine to non-return valve
Models from October 1991
Required: 1
between non-return valve and throttle body
Models from October 1991
Required: 1
to air conditioning servo pump
Models with 3.5 liter 24D, 25D, 35D and 36D engines
Required: 1
to evaporator
Models with 3.5 liter und 22D, 23D, 31D engines
Required: 1
to evaporator
Models with 3,9 liter and 37D, 38D engines
Required: 1