Swivel, wheel bearings and drive shafts - from VIN...GA399973 (1989-96)
in original quality
Required: 2
for swivel pin bearing and constant velocity joint - front suspension. Feature: fixed by 7 bolts and inner oil sel with 30 mm inner diameter
Required: 2
swivel pin bearing housing - inner seal with 30 mm inner diameter
Required: 2
retaining swivel housing to axle housing
to VIN...GA437775
Required: 14
retaining swivel housing to axle housing
from VIN...GA437776
Required: 12
right side, 33 spline. Short shaft
Required: 1
left side, 33 spline. Long shaft
Required: 1
RH
LHD models to VIN JA615502
Required: 1
LH
LHD models to VIN JA615502
Required: 1
RH
RHD models to VIN JA615502
Required: 1
LH
RHD models to VIN JA615502
Required: 1
RH
LHD models from JA615503 to KA637567
Required: 1
LH
LHD models from JA615503 to KA637567
Required: 1
RH
RHD models from JA615503 to KA637567
Required: 1
LH
RHD models from JA615503 to KA637567
Required: 1
RH
LHD models from VIN KA637568
Required: 1
LH
LHD models from VIN KA637568
Required: 1
RH
RHD models from VIN KA637568
Required: 1
LH
RHD models from VIN KA637568
Required: 1
stub axle housing - supplied with washer and nut
Required: 2
stub axle to hub carrier
Required: 12
between lower swivel pin and hub carrier
Required: 2
front suspension - inner and outer bearing
Required: 4
with M16 x 1.5 thread and 40.2 mm total length - press fit type
Required: 10
