Cylinder head Cooper 997 cc and Cooper 998 cc A series
with breather
early cars
Required: 1
black plastic, not vented
early cars
use with vented rocker cover 292731 only
Required: 1
without breather - green, with chromed filler cap, fitting material & gasket
Required: 1
without breather
from conversions, looks like new
Required: 1
chromed, with oil filler cap
Required: 1
black plastic, with breather
Required: 1
chromed - length: 7/8"
alternatives
Required: 2
genuine type with 14,28 mm diameter
alternatives
Required: 1
reproduction with 14,28 mm diameter
alternatives
Required: 1
oversize + 0.005"
alternatives
Required: 1
with threat for rocker shaft adjusting screw
Required: 1
for adjusting screw
could be used alternative for 8612
Required: 1
without threat for rocker shaft adjusting screw
Required: 3
forged
could be replaced by rocker arm 203398 or 7020
Required: 8
in rocker arm
for rocker arm 292898
Required: 8
pressed steel - used item
could be replaced by rocker arm 7020
Required: 8
rocker arm - 1/4" UNF
for rocker arm 292828 and 203398
Required: 8
rocker arm adjusting screw - 1/4" UNF
for rocker arm 292828 and 203398
Required: 8
sintered
could be used as replacement for rocker arms 298828 and 203398
Required: 8
rocker arm - 5/16" UNF
for rocker arm 7020
Required: 8
rocker arm adjusting screw - 5/16" UNF
for rocker arm 7020
Required: 8
bronce, Inlet and exhaust valve
alternative for 8238
Required: 8
diameter: 29,4 mm length: 87,4 mm
997 cc
Indentification: large collet groove
Required: 4
diameter: 29,3 mm length: 87,4 mm
998 cc, engine no. 9FA/SA/H101 bis H1034 (minus H407) 9FD/SA/L101 bis L1580
Indentification: large collet groove
Required: 4
diameter: 31,0 mm length: 87,3 mm
998 cc, engine no. 9FA/SA/H1035 to H4999 (plus H407) 9FD/SA/H101 to H33660 9FD/SA/L101 on
Indentification: large collet groove
Required: 4
diameter: 25,5 mm length: 86,9 mm
Indentification: large collet groove
Required: 4
inner
only 998 cc
more valve springs
Required: 8
inner spring, lower
only 998 cc
Required: 8
modern alternative to 'O' rings 8625
Required: 8
top
for valves with large collet groove
Required: 8
pair
for valves with large collet groove
Required: 8
valve cotter
for valves with large collet groove
Required: 8
inlet valve, oversize + 0.0625"
semi finished
Required: 4
exhaust valve
for unleaded fuel, semi finished
Required: 4
exhaust valve, oversize + 0.0625"
for unleaded fuel, semi finished
Required: 4
brass, for oil hole
Required: 1
for bypass hose
also used by cast iron water pumps
Required: 1
classic soft material gasket on metal layer
Required: 1
classic copper gasket on metal layer
alternative for gasket 204045
Required: 1
only used if no heating tap is mounted
Required: 1
for heater tap or blanking plate
Required: 2
alternative for spark plug 204835
Required: 4
non-setting gasket and jointing compound
Content: 80 ml (€199.88 / 1000 ml)
with soft material head gasket on metal layer
Required: 1
with copper head gasket on metal layer
alternative for gasket set 12625
Required: 1
