SU-HS6 Carburateur pièces détachées - TR4A à partir de CTC62191
fast idle
Part of our sundries kit 21455 (ill. 1)
Requis: 2
Part of our sundries kit 21455 (ill. 1)
Requis: 2
axe de papillon. Douille de réparation avec surdimension, pour tous les carburateurs SU et Zenith Stromberg à utiliser avec l'axe papillon de 5/16"
Requis: 4
front carburettor - supplied in pairs
Contains throttle spindle and choke lever return springs (ill. 8 and 20)
Requis: 1
throttle shaft - rear carburettor
Part of our sundries kit 2731 (ill. 19)
Requis: 1
USA specification vehicles - carburettor no. AUD284
Requis: 2
for 5/16" throttle spindles with standard size. Length: 115 mm
Requis: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Requis: 1
Pour carburateur SU, 3 pièces (y compr. outil pour réglage du porte-injecteur)
Requis: 1
rear carburettor
Part of our sundries kit 2731 (ill. 19)
Requis: 1
front carburettor
Part of our sundries kit 2731 (ill. 19)
Requis: 1
throttle spindle
Part of our sundries kit 2731 (ill. 19)
Requis: 2
pour axe de papillon sur le carburateur avant et arrière - réplique en acier inoxydable
Requis: 2
throttle spindle
Part of our sundries kit 2731 (ill. 19)
Requis: 2
front carburettor
Original type
Requis: 1
rear carburettor
Replacement - these levers should be fitted only in pairs
Requis: 1
front carburettor
Replacement - these levers should be fitted only in pairs
Requis: 1
starter bar guide - complete kit with sleeve and washers
Requis: 2
European specification vehicles - carburettor no. AUD209
Requis: 2
USA specification vehicles - carburettor no. AUD284
Requis: 2
with piston
USA specification vehicles - carburettor no. AUD284
Requis: 2
fixed - TW - standard
European specification vehicles - carburettor no. AUD209
Requis: 2
fixed - QW - standard
USA specification vehicles - carburettor no. AUD284
Requis: 2
with spring - carburettor piston
European specification vehicles - carburettor no. AUD209
Requis: 2
complet. Pour carburateur SU-HS avec pointeau rigide
Requis: 2
Part of our jet bearing kit 2735 (ill. 37)
Requis: 2
Part of our jet bearing kit 2735 (ill. 37)
Requis: 2
rear carburettor
European specification vehicles - carburettor no. AUD209
Requis: 1
front carburettor
European specification vehicles - carburettor no. AUD209
Requis: 1
carburateur arrière - Diamètre : 0,90". Identification : bande verte
Requis: 1
front carburettor
USA specification vehicles - carburettor no. AUD284
Requis: 1
main jet
Part of our main jet 17243, 1504, 16347 and 16350 (ill. 43)
Requis: 2
carburateur SU-HS6 arrière
Requis: 1
carburateur SU-HS6 avant
Requis: 1
pour carburateurs SU - alésage: 0,096"
Requis: 2
pour carburateurs de type SU-H, SU-HD et SU-HS - remplace la valve du pointeau flotteur
Requis: 2
pour carburateur de type SU HS - flotteur insubmersible, fabriqué en mousse nitrile
Requis: 2
