Fuses and wiring harness fittings
in metal with insulation to the bracket, for two cables - variant with E10/13 screw base for bulb 2877
in metal and cable - variant with E10/13 screw base for bulb 2877
for soldering - cable cross section: up to 2.00 mm²
for soldering - cable cross section: over 2.00 mm²
for crimping or soldering - cable cross section: 0.65 mm², carrying capacity: 5.75 amps
for crimping or soldering - cable cross section: 1.00 mm², carrying capacity: 8.00 amps
for crimping or soldering - cable cross section: 2.00 mm², carrying capacity: 25 amps
for crimping or soldering - cable cross section: 3.00 mm², carrying capacity: 33 amps
for pushing - cable cross section: up to 2.00 mm²
for 1/8" lucar connector 356055 (ill. 24)
for 3/16" lucar connector 18657 (ill. 24)
for 1/4" lucar connector 356057 (ill. 24)
for 1/4" lucar connector 14779 (ill. 24)
for 1/4" lucar connector 356058 (ill. 24)
for 1/4" lucar connector 356059 (ill. 24)
for 3/8" lucar connector 9149 (ill. 24)
for 1/2" lucar connector 356060 (ill. 24)
for 3/16" lucar connector 356056 (ill. 25)
for 1/4" lucar connector 356061 (ill. 25)
for 3/8" lucar connector 356062 (ill. 25)
for 3/16" lucar connector 300378 (ill. 26)
for 1/4" lucar connector 5556 (ill. 26)
for eyelets with straight terminals (ill. 28 & 30)
25 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
35 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
50 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
25 Ampere with 32 mm overall length and 6.2 mm diameter. Packet of five glass type fuses
35 Ampere with 32 mm overall length and 6.2 mm diameter. Packet of five glass type fuses
1/4" - cable cross section: 2.00 mm², piggy-back type
1/2" - cable cross section: 8.50 mm²
3/16" - cable cross section: 2.00 mm²
3/16" - slotted terminal. To suit up to 2.00 mm² cable diameter
3/16" - slotted terminal. To suit over 2.00 mm² cable diameter
3/16" hole - flag type eyelet terminal. To suit up to 2.00 mm² cable diameter
1/8" hole - cable cross section: up to 2.00 mm²
3/16" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
1/4" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
5/16" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
3/8" hole - eyelet terminal. To suit up to 2.00 mm² cable diameter
3/16" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
1/4" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
5/16" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
3/8" hole - eyelet terminal. To suit over 2.00 mm² cable diameter
p-shaped metal clip with 1/4" clamping range and 7/32" fixing hole diameter
for 1” cable and 7/32” hole
PVC - for 7/16” cable and 9/64” hole
