Hub carrier and arms
with alignment dowel - steering arm to hub carrier
Richiesto: 4
for one car side, front suspension
Richiesto: 2
for ball joint
part of kit 11683
Richiesto: 4
2 x 0.003", 2 x 0.005", 2 x 0.010"
part of kit 11683
for swivel pin
part of kit 11683
Richiesto: 4
lower - right hand, straight hole
up to 1965
could be replaced by arm 305051 using bush 203386
Richiesto: 1
lower - left hand, straight hole
up to 1965
could be replaced by arm 306262 using bush 203386
Richiesto: 1
lower - right hand
1965 on
could also be used as replacement for arm 12046 together with bush 203386
Richiesto: 1
lower - left hand, tappered hole
1965 on
could also be used as replacement for arm 21022 together with bush 203386
Richiesto: 1
for negative camber 1.5° - front - supplied in pairs
alternative for standard arms - use with bush 203386 or 311787
Richiesto: 1
rubber, shouldered for straight hole, lower arm
upto 1965
Richiesto: 4
shouldered for straight hole, lower arm
upto 1965
Richiesto: 4
rubber, tapered with inner sleeve, lower arm
1965 on
Richiesto: 4
tapered with inner sleeve, lower arm
1965 on
Richiesto: 4
Double tapered with inner sleeve, lower arm - set for both sides
1965 on
Richiesto: 1
wishbone to front subframe - set for one car side with bushes and washers
Richiesto: 2
adjustable with 5/8" diamter - supplied in pairs
Richiesto: 1
tie rod to subframe
alternative to rubber bush 214931
Richiesto: 4
with washer - for bush and retaining tie rod
Richiesto: 2
upper - RH side
all models except vehicles with hydrolastic suspension (1959-2000)
Richiesto: 1
upper - LH side
all models except vehicles with hydrolastic suspension (1959-2000)
Richiesto: 1
upper - RH side
Vehicles with hhydrolastic suspension (1964-69)
Richiesto: 1
upper - LH side
Vehicles with hhydrolastic suspension (1964-69)
Richiesto: 1
for seal ring upper arm
part of kit 305074
Richiesto: 4
shaft upper arm
part of kit 305074
Richiesto: 2
fitting retaining plate
part of kit 305074
Richiesto: 4
retaining shaft upper arm
part of kit 305074
Richiesto: 4
below upper arm
alternative to rubber buffer 1158
Richiesto: 2
