Pinze dei freni, dischi dei freni, tamburi e pastiglie dei freni
front brake caliper - used item, galvanized with tested threads
Richiesto: 2
front, Set for one axle. Identification: square type
Richiesto: 1
front. Set for one axle. Characteristic: square type
Richiesto: 1
with 2.1/8" piston - front axle. Characteristic: variant for square pads
Richiesto: 4
with 2.1/8" piston - front axle. Characteristic: variant for square pads
Richiesto: 4
with 2.1/8" piston - front axle. Characteristic: variant for square pads
Richiesto: 4
with 2.1/8" stainless steel piston - front brakes. Characteristic: variant for square pads
Richiesto: 4
front suspension. Axle set
Per side
Richiesto: 1
securing brake cylinder to caliper - 7/8" x 1/4" UNF, high tensile grade: V
Per side
Richiesto: 8
for both front brake discs
Mark II (1964-69) - 2.4 from 118185 and 127676, 3.4 from 167830 and 180032, 3.8 from 233382 and 224017 plus all 240 and 340 models. Please note: Needs modification when using in earlier models
Richiesto: 1
fixing upper front brake shield to stub axle carrier
Per side
Richiesto: 4
fixing brake dust cover assembly clips
Per side
Richiesto: 4
rear. Set for one axle. Characteristic: square type
Richiesto: 1
rear. Set for one axle. Characteristic: square type
Richiesto: 1
rear brakes. Variant with 1.1/2" piston for square pads
Richiesto: 4
rear brakes. Variant with 1.1/2" piston for square pads
Richiesto: 4
rear brakes. Variant with 38 mm stainless steel piston for square pads
Richiesto: 4
rear brake cylinder and piston with 1.1/2 " diameter - axle set
Per car
Richiesto: 1
securing brake cylinder to caliper - 7/8" x 1/4" UNF, high tensile grade: V
Per side
Richiesto: 8
caliper piston - supplied with ball
Set per car
Richiesto: 1
rear brake cylinder - 0.005"
Per side
Richiesto: 4
rear brake cylinder - 0.020"
Per side
Richiesto: 2
rear brake cylinder - 0.040"
Per side
Richiesto: 2
RH - exchange
Later adjustable type. Quote chassis no.
Richiesto: 1
LH - exchange
Later adjustable type. Quote chassis no.
Richiesto: 1
fixing handbrake mechanism to rear brake caliper
Richiesto: 1
handbrake mechanism
Early models. Quote chassis no.
Richiesto: 1
handbrake mechanism, R/H and L/H
Late models. Quote chassis no. Suitable earlier models if supplied with 209097.
Richiesto: 1
handbrake assembly
Early models. Quote chassis no.
Richiesto: 1
handbrake assembly
Late models. Quote chassis no.
Richiesto: 1
fixing disc to rear hub
Per side.Required if wire wheels are fitted
Richiesto: 5
front suspension to 4 pot calipers. Runs with the original brake discs
Richiesto: 1
RH front - exchange. With brake pistons and pads assembly
Richiesto: 1
LH front - exchange. With brake pistons and pads assembly
Richiesto: 1
