Testa cilindri 1275 ccm A-plus Serie carburatore e SPI fino 1997
Alloy Rocker covers
Richiesto: 1
from conversions, looks like new
Richiesto: 1
genuine type with 14,28 mm diameter
alternatives
Richiesto: 1
reproduction with 14,28 mm diameter
alternatives
Richiesto: 1
with threat for rocker shaft adjusting screw
Richiesto: 1
without threat for rocker shaft adjusting screw
Richiesto: 3
rocker arm adjusting screw - 5/16" UNF
Richiesto: 8
bronce, Inlet and exhaust valve
alternative for 8318
Richiesto: 8
with 33.2 mm head diameter and 90.7 mm total length - identified by triple collet groove
Richiesto: 4
with 35.7 mm head diameter and 90.7 mm total length - identified by triple collet groove
Richiesto: 4
with 29.4 mm head diameter and 90.7 mm total length - identified by triple collet groove
Richiesto: 4
top
for valves with triple collet groove
Richiesto: 8
for valves with triple collet groove
Richiesto: 16
thermostat housing - uprated, made from high quality 1.5 mm gasket material, extremepressure resistant to 750 psi
alternative
Richiesto: 2
cars with CR 9.4:1 and HIF38 carburettor
Richiesto: 1
Cooper cars with CR 10.1:1 and HIF44 carburettor
Richiesto: 1
Thermostat housing (lower)
cars with CR 9.4:1 and HIF38 carburettor
Richiesto: 1
thermostat housing (lower)
Cooper cars with CR 10.1:1 and HIF44 carburettor
Richiesto: 1
thermostat housing (lower)
single point injection cars
Richiesto: 1
shouldered, 5/16" UNC, 7/16" AF spannersize
Richiesto: 3
for bypass hose
only engine G03, G04, G05, J04, J05, J06
Richiesto: 1
water pump
only engine G03, G04, G05, J04, J05, J06
easy fitting
Richiesto: 1
hose to adaptor
only engine G03, G04, G05, J04, J05, J06
Richiesto: 2
large port specification
if LCB-Manifold fitted or bigger ports
Richiesto: 1
for inlet-/ outletmanifold
carburettor cars
Richiesto: 6
for inlet-/ outletmanifold
single point injection cars
Richiesto: 6
classic copper gasket on metal layer for engines up to 1340 cc
alternatives
Richiesto: 1
classic soft material gasket on metal layer
Richiesto: 1
classic soft material gasket on metal layer with special sealing ring for the oil feed
alternatives
Richiesto: 1
not single point injection cars
only used if no heating tap/water outlet is mounted
Richiesto: 1
1/4" UNF, 3/8" AF spannersize
not single point injection cars
Richiesto: 2
non-setting gasket and jointing compound
Richiesto: 1
Contenuto: 80 ml (199,88 €* / 1000 ml)
with classic soft material head gasket on metal layer
1275 cc models with single SU-HIF44 carburettor (1990-97)
Richiesto: 1
with classic soft material head gasket on metal layer
1275 cc models with single SU-HIF44 carburettor (1990-97)
Richiesto: 1
with classic soft material head gasket on metal layer
1.3 Spi (1992-97)
Richiesto: 1
